rtn 150 retainers (order seperately) rtn 250 .190 (4.826mm) section a-a (4.318mm) (.762mm) .030 .170 - .005 +.001 xxx jg az kh dpz d c b a a b c d 1 2 3 4 5 6 7 8 8 7 6 5 4 js 4/23/10 3/11/09 12/15/08 8/25/98 revised per ecr111009az01 ul 94-hb see notes break all corners and sharp prohibited. drawn checked title: b dwg. no. scale: 8:1 rev revisions sheet 1 of 1 do not scale drawing size material rev initials notes visual communications company, inc is phone (760) 560-1300 fax (760) 560- 1301 emai l vccsales@vcclite.com date description ecn # date proprietary and confidential 1. mounting: panel mounting hole .171" (4.34mm) diameter approval 001 4/23/10 3 revise .170" dimension tolerances visual communications company, inc. 190 bosstick boulevard, suite101 san marcos, ca 92069 usa 2 1 the information contained in this : 3. u.s.& foreign pat issued & pend. .050" clearance between litepipe and led. lpc xxx_a drawing is the sole property of 1 acrylic (optical grade) n/a without the written permission of third angle projection vertical finish update dwg format initial release 001 2 2. standoff used to adjust the height of a standard led above the pcb to mainta in a maximum visual communications company, inc. any litepipe from .500" to 2.00" the spring retainer rtn 250 is recommended for rigidity k.howard edges .030 max reproduction in part or as a whole litep ipe from .200" to .500" use grommet retainer rtn 150 unless otherwise specified dimensions are in inches: angles decimals 1' . x .020 .xx .010 finish .xxx .005 cliplite 4mm litepipe 5/4/10 aa special lengths upon requests 026 044 062 080 098 120 142 165 187 030 048 066 084 102 125 147 170 192 034 052 070 088 107 130 152 175 197 036 054 072 090 110 132 155 177 200 032 050 068 086 105 127 150 172 195 028 046 064 082 100 122 145 167 190 024 042 060 078 096 117 140 162 185 (min 020=.200" / max 200=2.000") ctp length code 020 038 056 074 092 112 135 157 180 022 040 058 076 094 115 137 160 182 ordering code: lpc xxx color ctp clear
|
